Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
How can I clear the airbag warning indicator on my 2007 Yaris?
3099 views
2 answers
★ Top Answer
In the 2007 Toyota Yaris, if your airbag indicator is on, it's crucial to identify the problem in the system. Sometimes, it may be a minor issue, but other times it could be a serious safety concern for passengers in the event of a crash. After fixing the fault, you can reset the code by jumping specific terminals in the OBD-II port. Start by connecting the TC and CG terminals with the ignition off. Turn the ignition on and wait for the SRS light to flash, then remove the jumper from TC to make the light solid. Reconnect the jumper to TC within a few seconds, and then repeat this process one more time. If the diagnostic codes are successfully cleared, the SRS light will flash steadily, indicating a successful reset. If any trouble codes remain, the SRS light will flash in a pattern to show which code is still present.
More answers
-
Start your car by turning the key in the ignition to reset the airbag light on your Toyota Yaris. Keep holding the key in the on position until the airbag warning light turns off. Then, turn the ignition off for a little over three seconds. Repeat these steps two more times for a total of three cycles. Next, switch the ignition back on to completely reset the airbag light.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
